SPECIFICATIONS
MECHANICAL:
Housing Material:
Standard Models and CEX: Cast aluminum with gray polyester powder coat finish Ingress Protection IP66 with 0.4 joule impact rating
Housing Weight:
Standard Models: 5.9 lbs. (2.69kg); CEX Model: 13.2 lbs (5.98 kg)
Mounting:
Requires one threaded mounting flange, ordered separately (see below).For fiber optic mount, refer to bulletin CU-117. In the specific case of installation on InSight I fiber optics already in place refer to bulletin 133-754 and use Adapter Kit 129-193.
Cooling / Purge Air Requirements:
Source:
Clean, dry, cool
Volume:
4 SCFM (113 l/min) at 3/8” threaded mounting flange, or 1 inch “Y” fitting, mounted on scanner sight pipe. Temperature near the upper limit of the scanner operating range and/or use with dirty/dusty fuels may require up to 15 SCFM (425 l/min).
Pressure:
Adequate to overcome furnace or windbox pressure
Operating Temperature Rating:
-40°F to + 150°F Ta (-40°C to +65°C Ta)
Storage Temperature Rating:
-40°F to + 185°F Ta (-40°C to +85°C Ta)
Humidity:
0% to 95% relative humidity, non-condensing
STANDARD MOUNTING FLANGE:
Material/Weight:
Cast aluminum with gray polyester powder coat finish. Contains an integral heat-insulating female thread insert 3 lb (1.4 kg)
Flange Threads:
P/N 60-2919-1 1" NPT female pipe mount with 3/8” NPT female cooling air connection.P/N 60-2919-2 1" BSP female pipe mount with 3/8” BSP female cooling air connection.
OPTIONAL MOUNTING FLANGE, CAST ALUMINUM:
Material/Weight:
Cast aluminum (without heat-insulating thread insert), with grey polyester powder coat finish / 0.5 lbs (0.23 kg)
Flange Threads:
P/N 60-2692, 1" NPT female pipe mount with 3/8" NPT female cooling air connection.P/N 60-2693, 1" BSP female pipe mount with 3/8" BSP female cooling air connection.
ELECTRICAL:
Input Power:
24 Vdc, +10%, -15% supply current: 0.25A, 6VA, Hold Time must be 20 msecMin. Fireye power supply 60-2685 is recommended
Electrical Connection:
12-pin screw type quick-disconnect
Relay Output:
FLAME RELAY, SPST (N.O.) FAULT RELAY, S PST (N.C.)
Contact Rating:
Minimum: 10 mA @ 5 Vdc (All models)Maximum: 2 A @ 30 Vdc; 2A @ 50 Vac (Series 4E-1WINC models only) Maximum 2A @ 30 Vdc; 2A @ 230 VAC (All other models)
Analog Output:
4-20 mA dc current, referenced to 24Vdc common, Max. connected 1oad: 750 ohms
Operator Interface:
Alpha -Numeric Display with five pushbutton keys.
Cable Specification:
P/N 59-547 (12-conductor):Multi-core, 12 conductor (color coded), 18- AWG, with foil wrap and overall braided shield and drain wire. PLTC-ER rating. Maximum cable length 1000 feet (305 meters) Cable Jacket: PVC / black (flame-retardant, RoHS compliant)Temperature Rating: -40°F to +221°F (-40°C to +105°C)P/N 59-547 Nominal O.D. 0.52" (13.2 mm), maximum O.D. 0.56” (14.2mm)
Vibration specs:
Frequency range: 10 Hz – 150 Hz. Acceleration / Amplitude: 58 to 150 Hz: 1.0 g / 10 to 58 Hz: 0.075 , Sweep rate: 1 octave per minute Number of sweep cycles: 10 Number of axes: 3, mutually perpendicular
MECHANICAL:
Housing Material:
Standard Models and CEX: Cast aluminum with gray polyester powder coat finish Ingress Protection IP66 with 0.4 joule impact rating
Housing Weight:
Standard Models: 5.9 lbs. (2.69kg); CEX Model: 13.2 lbs (5.98 kg)
Mounting:
Requires one threaded mounting flange, ordered separately (see below).For fiber optic mount, refer to bulletin CU-117. In the specific case of installation on InSight I fiber optics already in place refer to bulletin 133-754 and use Adapter Kit 129-193.
Cooling / Purge Air Requirements:
Source:
Clean, dry, cool
Volume:
4 SCFM (113 l/min) at 3/8” threaded mounting flange, or 1 inch “Y” fitting, mounted on scanner sight pipe. Temperature near the upper limit of the scanner operating range and/or use with dirty/dusty fuels may require up to 15 SCFM (425 l/min).
Pressure:
Adequate to overcome furnace or windbox pressure
Operating Temperature Rating:
-40°F to + 150°F Ta (-40°C to +65°C Ta)
Storage Temperature Rating:
-40°F to + 185°F Ta (-40°C to +85°C Ta)
Humidity:
0% to 95% relative humidity, non-condensing
STANDARD MOUNTING FLANGE:
Material/Weight:
Cast aluminum with gray polyester powder coat finish. Contains an integral heat-insulating female thread insert 3 lb (1.4 kg)
Flange Threads:
P/N 60-2919-1 1" NPT female pipe mount with 3/8” NPT female cooling air connection.P/N 60-2919-2 1" BSP female pipe mount with 3/8” BSP female cooling air connection.
OPTIONAL MOUNTING FLANGE, CAST ALUMINUM:
Material/Weight:
Cast aluminum (without heat-insulating thread insert), with grey polyester powder coat finish / 0.5 lbs (0.23 kg)
Flange Threads:
P/N 60-2692, 1" NPT female pipe mount with 3/8" NPT female cooling air connection.P/N 60-2693, 1" BSP female pipe mount with 3/8" BSP female cooling air connection.
ELECTRICAL:
Input Power:
24 Vdc, +10%, -15% supply current: 0.25A, 6VA, Hold Time must be 20 msecMin. Fireye power supply 60-2685 is recommended
Electrical Connection:
12-pin screw type quick-disconnect
Relay Output:
FLAME RELAY, SPST (N.O.) FAULT RELAY, S PST (N.C.)
Contact Rating:
Minimum: 10 mA @ 5 Vdc (All models)Maximum: 2 A @ 30 Vdc; 2A @ 50 Vac (Series 4E-1WINC models only) Maximum 2A @ 30 Vdc; 2A @ 230 VAC (All other models)
Analog Output:
4-20 mA dc current, referenced to 24Vdc common, Max. connected 1oad: 750 ohms
Operator Interface:
Alpha -Numeric Display with five pushbutton keys.
Cable Specification:
P/N 59-547 (12-conductor):Multi-core, 12 conductor (color coded), 18- AWG, with foil wrap and overall braided shield and drain wire. PLTC-ER rating. Maximum cable length 1000 feet (305 meters) Cable Jacket: PVC / black (flame-retardant, RoHS compliant)Temperature Rating: -40°F to +221°F (-40°C to +105°C)P/N 59-547 Nominal O.D. 0.52" (13.2 mm), maximum O.D. 0.56” (14.2mm)
Vibration specs:
Frequency range: 10 Hz – 150 Hz. Acceleration / Amplitude: 58 to 150 Hz: 1.0 g / 10 to 58 Hz: 0.075 , Sweep rate: 1 octave per minute Number of sweep cycles: 10 Number of axes: 3, mutually perpendicular