2-wire HART transmitter
RTD, TC, Ohm, or mV input
Extremely high measurement accuracy
HART 5 protocol
Can be installed in Ex zone 0
1- or 2-channel version
Application
Linearized temperature measurement with Pt100...Pt1000, Ni100...Ni1000, or TC sensor.
Difference or average temperature measurement of 2 resistance or TC sensors.
Conversion of linear resistance variation to a standard analog current signal, for instance from valves or Ohmic level sensors.
Amplification of a bipolar mV signal to a standard 4...20 mA current signal.
Connection of up to 15 channels to a digital 2-wire signal with HART communication.
Technical characteristics
Within a few seconds the user can program PR6335D to measure temperatures within all ranges defined by the norms.
The RTD and resistance inputs have cable compensation for 2-, 3- and 4-wire connection.
The 6335D has been designed according to strict safety requirements and is therefore suitable for application in SIL 2 installations.
Continuous check of vital stored data for safety reasons.
Sensor error detection according to the guidelines in NAMUR NE89.
Mounting / installation
Mounted vertically or horizontally on a DIN rail. As the devices can be mounted without any distance between neighboring units, up to 84 channels can be mounted per meter.
RTD, TC, Ohm, or mV input
Extremely high measurement accuracy
HART 5 protocol
Can be installed in Ex zone 0
1- or 2-channel version
Application
Linearized temperature measurement with Pt100...Pt1000, Ni100...Ni1000, or TC sensor.
Difference or average temperature measurement of 2 resistance or TC sensors.
Conversion of linear resistance variation to a standard analog current signal, for instance from valves or Ohmic level sensors.
Amplification of a bipolar mV signal to a standard 4...20 mA current signal.
Connection of up to 15 channels to a digital 2-wire signal with HART communication.
Technical characteristics
Within a few seconds the user can program PR6335D to measure temperatures within all ranges defined by the norms.
The RTD and resistance inputs have cable compensation for 2-, 3- and 4-wire connection.
The 6335D has been designed according to strict safety requirements and is therefore suitable for application in SIL 2 installations.
Continuous check of vital stored data for safety reasons.
Sensor error detection according to the guidelines in NAMUR NE89.
Mounting / installation
Mounted vertically or horizontally on a DIN rail. As the devices can be mounted without any distance between neighboring units, up to 84 channels can be mounted per meter.