Repeater / power supply
1- or 2-channel version
3- / 5-port 3.75 kVAC galvanic isolation
Loop supply > 17.1 V
20 programmable measurement ranges
Universal supply by AC or DC
Application
Power supply and signal isolator for 2-wire transmitters.
Signal isolator for analog current / voltage signals.
1 : 1 or signal conversion of analog current / voltage signals.
Technical characteristics
The 20 factory-calibrated measurement ranges in the 5104A can be selected by the internal DIP-switches without the need for recalibration. Special measurement ranges can be delivered.
PR5104A is based on microprocessor technology for gain and offset. The analog signal is transmitted at a response time of less than 25 ms.
Inputs, outputs, and supply are floating and galvanically separated.
The output can be connected either as an active current / voltage transmitter or as a 2-wire transmitter.
Mounting / installation
Mounted vertically or horizontally on a DIN rail. By way of the 2-channel version up to 84 channels per meter can be mounted.
1- or 2-channel version
3- / 5-port 3.75 kVAC galvanic isolation
Loop supply > 17.1 V
20 programmable measurement ranges
Universal supply by AC or DC
Application
Power supply and signal isolator for 2-wire transmitters.
Signal isolator for analog current / voltage signals.
1 : 1 or signal conversion of analog current / voltage signals.
Technical characteristics
The 20 factory-calibrated measurement ranges in the 5104A can be selected by the internal DIP-switches without the need for recalibration. Special measurement ranges can be delivered.
PR5104A is based on microprocessor technology for gain and offset. The analog signal is transmitted at a response time of less than 25 ms.
Inputs, outputs, and supply are floating and galvanically separated.
The output can be connected either as an active current / voltage transmitter or as a 2-wire transmitter.
Mounting / installation
Mounted vertically or horizontally on a DIN rail. By way of the 2-channel version up to 84 channels per meter can be mounted.