SPECIFICATIONS
Mounting
Models are provided with 1" female thread mounting, either US NPT or British Whitworth accordingto model (see table below)
.
Housing, Including Mounting FlangeMaterial:
Die Cast Aluminum
Design:
Hinged Mounting Flange, with air fitting to be permanently installed,carries two 1/4 - 20 screws which may be loosened for quick removal ofthe scanner housing, such as for lens cleaning.
Weight:
3.75 lbs. (1.7kg)
Electrical
Power Requirement:
4 VA AC from associated Fireye control (see note below).
Frequency:
Frequency of scanner must match frequency of Fireye control and powerline supply (See Table 1).
Connection:
1/2 inch 14 NPSM tapping.
Temperature Range:
Maximum operating: 200F (93C)Minimum operating:-40F (-40C)
Optical Range:
190 to 250 nanometers. No response to infrared radiation or visiblelight.
Purge Air
Source:
Clean ambient
Volume Required:
4 SCFM (113 L/min. @ 4" water column above furnace pressure minimum) at 3/8 inch threaded housing inlet or 4 SCFM at 1 inch wye fitting in scanner sight pipe. Temperatures near the upper limit of thescanner operating range and/or use with dirty fuels may require up to 15 SCFM (425 L/min.).
Mounting
Models are provided with 1" female thread mounting, either US NPT or British Whitworth accordingto model (see table below)
.
Housing, Including Mounting FlangeMaterial:
Die Cast Aluminum
Design:
Hinged Mounting Flange, with air fitting to be permanently installed,carries two 1/4 - 20 screws which may be loosened for quick removal ofthe scanner housing, such as for lens cleaning.
Weight:
3.75 lbs. (1.7kg)
Electrical
Power Requirement:
4 VA AC from associated Fireye control (see note below).
Frequency:
Frequency of scanner must match frequency of Fireye control and powerline supply (See Table 1).
Connection:
1/2 inch 14 NPSM tapping.
Temperature Range:
Maximum operating: 200F (93C)Minimum operating:-40F (-40C)
Optical Range:
190 to 250 nanometers. No response to infrared radiation or visiblelight.
Purge Air
Source:
Clean ambient
Volume Required:
4 SCFM (113 L/min. @ 4" water column above furnace pressure minimum) at 3/8 inch threaded housing inlet or 4 SCFM at 1 inch wye fitting in scanner sight pipe. Temperatures near the upper limit of thescanner operating range and/or use with dirty fuels may require up to 15 SCFM (425 L/min.).