• Size Nasıl Yardımcı Olabiliriz?
  • +90 312 491 05 06
  • info@incendustri.com
INC-Logo-400X150pINC-Logo-400X150pINC-Logo-400X150pINC-Logo-400X150p
  • Homepage
  • About Us
  • Products
    • _____
      • SIGNAL ISOLATORS AND BARRIERS
      • FLOW MEASUREMENT
      • LIQUID ANALYSIS SYSTEMS
      • RECORDERS AND CONTROLLERS
      • VALVES AND MANIFOLDS
      • INDUSTRIAL BOILER AND BURNER EQUIPMENT
      • HIGH TEMPERATURE OVEN CAMERA SYSTEMS
    • _____
      • TEMPERATURE TRANSMITTERS
      • LEVEL MEASUREMENT
      • GAS ANALYZERS
      • POSITIONERS AND IP DIALERS
      • FITTIGS ELEMENTS
      • DENSITY AND CONCENTRATION ANALYZERS
    • _____
      • PRESSURE MEASUREMENT
      • TEMPERATURE MEASUREMENT
      • INDICATORS
      • ACTUATORS
      • PRESSURE REGULATORS AND FILTERS
      • BRIX METER
  • Representatives
    • PR Electronics
    • ABB Instrumentation
    • Panam Engineers
    • Fireye Inc.
    • Sensotech
    • Nuova Fima
    • Tercom
    • Flowline
    • Intra Automation
    • ProMtec
    • Delta Kamera Systeme
  • Images
  • Blog
  • Contact Us
  • English
  • Turkish
Teknik Döküman
SPECIFICATIONS
MECHANICAL:
Housing Material:
Standard Models and CEX: Cast aluminum with gray polyester powder coat finish Ingress Protection IP66 with 0.4 joule impact rating

Housing Weight:
Standard Models: 5.9 lbs. (2.69kg); CEX Model: 13.2 lbs (5.98 kg)

Mounting:
Requires one threaded mounting flange, ordered separately (see below).For fiber optic mount, refer to bulletin CU-117. In the specific case of installation on InSight I fiber optics already in place refer to bulletin 133-754 and use Adapter Kit 129-193.

Cooling / Purge Air Requirements:
Source:
Clean, dry, cool

Volume:
4 SCFM (113 l/min) at 3/8” threaded mounting flange, or 1 inch “Y” fitting, mounted on scanner sight pipe. Temperature near the upper limit of the scanner operating range and/or use with dirty/dusty fuels may require up to 15 SCFM (425 l/min).

Pressure:
Adequate to overcome furnace or windbox pressure

Operating Temperature Rating:
-40°F to + 150°F Ta (-40°C to +65°C Ta)

Storage Temperature Rating:
-40°F to + 185°F Ta (-40°C to +85°C Ta)

Humidity:
0% to 95% relative humidity, non-condensing

STANDARD MOUNTING FLANGE:
Material/Weight:
Cast aluminum with gray polyester powder coat finish. Contains an integral heat-insulating female thread insert 3 lb (1.4 kg)

Flange Threads:
P/N 60-2919-1 1" NPT female pipe mount with 3/8” NPT female cooling air connection.P/N 60-2919-2 1" BSP female pipe mount with 3/8” BSP female cooling air connection.

OPTIONAL MOUNTING FLANGE, CAST ALUMINUM:
Material/Weight:
Cast aluminum (without heat-insulating thread insert), with grey polyester powder coat finish / 0.5 lbs (0.23 kg)

Flange Threads:
P/N 60-2692, 1" NPT female pipe mount with 3/8" NPT female cooling air connection.P/N 60-2693, 1" BSP female pipe mount with 3/8" BSP female cooling air connection.
ELECTRICAL:
Input Power:
24 Vdc, +10%, -15% supply current: 0.25A, 6VA, Hold Time must be 20 msecMin. Fireye power supply 60-2685 is recommended

Electrical Connection:
12-pin screw type quick-disconnect

Relay Output:
FLAME RELAY, SPST (N.O.) FAULT RELAY, S PST (N.C.)

Contact Rating:
Minimum: 10 mA @ 5 Vdc (All models)Maximum: 2 A @ 30 Vdc; 2A @ 50 Vac (Series 4E-1WINC models only) Maximum 2A @ 30 Vdc; 2A @ 230 VAC (All other models)

Analog Output:
4-20 mA dc current, referenced to 24Vdc common, Max. connected 1oad: 750 ohms

Operator Interface:
Alpha -Numeric Display with five pushbutton keys.

Cable Specification:
P/N 59-547 (12-conductor):Multi-core, 12 conductor (color coded), 18- AWG, with foil wrap and overall braided shield and drain wire. PLTC-ER rating. Maximum cable length 1000 feet (305 meters) Cable Jacket: PVC / black (flame-retardant, RoHS compliant)Temperature Rating: -40°F to +221°F (-40°C to +105°C)P/N 59-547 Nominal O.D. 0.52" (13.2 mm), maximum O.D. 0.56” (14.2mm)

Vibration specs:
Frequency range: 10 Hz – 150 Hz. Acceleration / Amplitude: 58 to 150 Hz: 1.0 g / 10 to 58 Hz: 0.075 , Sweep rate: 1 octave per minute Number of sweep cycles: 10 Number of axes: 3, mutually perpendicular
Paylaş

Telefon

+90 312 491 05 06
  • Homepage
  • About Us
  • Products
  • Representatives
  • Images
  • Blog
  • Contact Us
  • English
  • Turkish
© 2020 INC Endüstriyel Ürünler. All Rights Reserved.
  • English
  • Turkish
  • Size Nasıl Yardımcı Olabiliriz?
  • +90 312 491 05 06
  • info@incendustri.com