• Size Nasıl Yardımcı Olabiliriz?
  • +90 312 491 05 06
  • info@incendustri.com
INC-Logo-400X150pINC-Logo-400X150pINC-Logo-400X150pINC-Logo-400X150p
  • Homepage
  • About Us
  • Products
    • _____
      • SIGNAL ISOLATORS AND BARRIERS
      • FLOW MEASUREMENT
      • LIQUID ANALYSIS SYSTEMS
      • RECORDERS AND CONTROLLERS
      • VALVES AND MANIFOLDS
      • INDUSTRIAL BOILER AND BURNER EQUIPMENT
      • HIGH TEMPERATURE OVEN CAMERA SYSTEMS
    • _____
      • TEMPERATURE TRANSMITTERS
      • LEVEL MEASUREMENT
      • GAS ANALYZERS
      • POSITIONERS AND IP DIALERS
      • FITTIGS ELEMENTS
      • DENSITY AND CONCENTRATION ANALYZERS
    • _____
      • PRESSURE MEASUREMENT
      • TEMPERATURE MEASUREMENT
      • INDICATORS
      • ACTUATORS
      • PRESSURE REGULATORS AND FILTERS
      • BRIX METER
  • Representatives
    • PR Electronics
    • ABB Instrumentation
    • Panam Engineers
    • Fireye Inc.
    • Sensotech
    • Nuova Fima
    • Tercom
    • Flowline
    • Intra Automation
    • ProMtec
    • Delta Kamera Systeme
  • Images
  • Blog
  • Contact Us
  • English
  • Turkish
9107A-Kullanım Klavuzu
9107A-Teknik Döküman
HART transparent driver
24 VDC supply via power rail or connectors
Fast response time
High active output load 725 Ohm / 20 mA
Output line fault detection via status relay
SIL2 certified via Full Assessment according to IEC 61508

Application
9107A is a 1- or 2-channel isolated 1:1 driver.
Operation and drive control of I/P converters, valves and indicators.
Operation of HART devices is possible as the unit transmits HART® communication signals bi-directionally.
The device can be mounted in and transmit signals to non-classified area and zone 2.
The PR 4511/4501 displays the process value for each channel and can be used to define high and low limits for detection of loop current level. If these limits are exceeded, the status relay will activate.
Dual channel versions can be used for signal splitter applications - 1 in and 2 out.

Advanced features
The PR 4511/4501 detachable display and the green and red front LEDs indicate operation status for each channel.
A tag number can be defined for each channel.
Output line fault detection.
In the 1-channel version the status relay can be used as a simple limit switch.

Technical characteristics
High galvanic isolation of 2.6 kVAC.
High accuracy better than 0.1%.
Continuous check of vital stored data for safety reasons.

Mounting
The devices can be mounted vertically or horizontally without distance between neighbouring units.
Paylaş

Telefon

+90 312 491 05 06
  • Homepage
  • About Us
  • Products
  • Representatives
  • Images
  • Blog
  • Contact Us
  • English
  • Turkish
© 2020 INC Endüstriyel Ürünler. All Rights Reserved.
  • English
  • Turkish
  • Size Nasıl Yardımcı Olabiliriz?
  • +90 312 491 05 06
  • info@incendustri.com